Aluminum alloy indoor rental LED display, P2.5 Led display
64x64dots
Application:
Full color screens are widely used in government and enterprise
projects, exhibitions, cultural tourism, commercial real estate,
outdoor advertising media and other fields. For example:
supermarkets, restaurants, travel agencies, commercial plazas,
cinemas, clubs, schools, hotels, hospitals, communities, commercial
buildings, subway stations, airports, etc. In short, many places
need led screens for various purposes, we will do our best to meet
trends and needs.
Details
1. Modular design for quick installation and removal
2. Highly reliable data hot backup, avoiding any communication
risks during the exhibition
3. High refresh rate up to 4200Hz, and live video without flashing
at all
4. Super brightness and color uniformity, pixel calibration before
leaving the factory
Description:
| Asphalt: | 2.5mm | Density: | 160000dots/㎡ |
| Module size: | 160x160mm | Module resolution: | 64x64dots |
| LED standard: | Patch 2121 | Brightness: | ≥1200CD /㎡ |
| Viewing distance: | 2.5-15m | Warranty period: | 2 Years |
Specification (parameter):
| Resolution / mm | 2.6 |
| Pixel configuration | 1R1G1B |
| Pixel density /m² | 147456dots/ m² |
| Module resolution | 96x96 |
| Module size / mm | 250x250 |
| Viewing distance | 3-50m |
| Single point brightness adjustment | Can be added |
| Single point color adjustment | Can be added |
| White balance brightness | 1500cd / m² |
| Color temperature | 6500K-9500K |
| Horizontal viewing angle | 120(°) |
| Vertical viewing angle | 60(°) |
| Signal processing bit | 10 or 16bits |
| Gray process | 1024x1024x1024 16834x16834x16834 65536x65536x65536 |
| Control distance | Network cable: 100m, multi film: 500m, single film: 2km |
| Driving mode | Constant drive current |
| Scanning method | 1/32 |
| Frame rate | 60Hz |
| Refresh rate | > 3000Hz |
| Control mode | Computer synchronization |
| Brightness adjustment range | Manual, automatic operation, continuous adjustment |
| 255 steps, no ash loss |
| Out of control point | <1/10000 |
| Working hours | ≥72hrs |
| MTBF | > 5000hrs |
| Lifetime | 100000hrs |
| All white (half brightness) | 50000hrs |
| Ambient temperature range | Range of working temperature:-20-45℃ |
| Maximum power:/ m² | <900W |
| Average power:/ m² | <280W |
| Self-test technology | LED check, communication check, power check |
| Temperature monitor (requires customization) |
| Remote monitoring | Remote monitoring, recording potential failures |
| Warning signals are sent to the operator (needs customization) |
| Software Environment | WindowsNT, Windows1999, WindowsXP |
| Luminous point width between centers | Deviation <3％ |
| Brightness uniformity | <10％ |
| Color uniformity (chromaticity coordinates) | ±0.003 |
| Power requirement | AC85-264V(50Hz-60Hz) |
| Contrast | (1000:1) |
| System protection | Moisture proof, dustproof, high temperature protection,
anti-corrosion, anti-burning, anti-static, anti-vibration |
| Humidity (work) | Working:10-95％ |
| Humidity (storage) | Storage:10-95％ |
Competitive advantages:
- Installation service, usually we are not responsible for overseas
installation, but we can provide technical support for you. If you
need this, we can arrange our technicians to your country, but the
cost is paid by the customer.
- Free lifetime maintenance and software upgrades.
- If you have any questions about the led display, we will reply you
within 24 hours, and provide maintenance instructions and problem
resolution within 48 hours.
- Providing customers with loaders so they can use the display
immediately after installation
- Led display, no need to debug
- Free technical training about how to use and process software.
